Diesel Particulate Filters (DPF) often gets clogged from soot due to extensive urban driving (low Cat temperature). Bluechem’s DPF Service is your solution.
The DPF Power Cleaner is engineered to help the regeneration of the DPF System. Regular use of this product as maintenance reduces downtime of your diesel engine vehicle. When mild service is necessary, the Bluechem DPF Top Gun Cleaner combined with the High Pressure Gun allows automotive service shop to clean the DPF without removing it from the vehicle. For High build-up of soot and residuals (Clogged DPF), severe service of the DPF flushing is the solution. Unlike the hi-temperature baking method, DPF Flushing Liquid reliably dissolves and removes all soot deposits and residue. The Flushing Liquid gently cleans and is safe for use with aluminum, magnesium, zinc and cadmium parts. These services are perfectly adapted for the latest generation of particulate filters.
DPF Cat Cleaner
The DPF/Catalyst Cleaner dissolves and removes all contamination and soot residues from the particulate filter and the catalyst – no disassembling required. The product eliminates any performance decrease or disruption caused by contaminated particulate filter and catalysts. DPF/Catalyst Cleaner restores the complete function of the diesel particulate filter and catalyst.
The product is also ideal for EGR-valve cleaning.
- Dissolves and removes contamination in the diesel particulate filter and catalyst.
- Cleaning without dismantling
- Evaporates residue-free
Flashpoint: 75 °C
ph value at 20°C: 11,4
Solubility in water: insoluble
Physical state: aerosol
Ignition temperature: 270 °C
Density at 20°C: 1,011 g/cm3
DPF Top Gun Cleaner
Diesel Particle Filter Cleaner solves and removes all soot deposition and residues without disassembly. DPF Top Gun Cleaner cleans gently and can be used on all aluminum, magnesium, zinc and cadmium parts. The product can be used perfectly for the latest generation of particle filters.
Fields of application:
Suitable for all diesel particle filters.
Spray over the probe-hole with the special probe in the direction of the particle filter. DPF Top Gun Cleaner is applicable to all closed particle filter systems. Check oil level before cleaning. In case of oil dilution by diesel necessarily perform an oil change. Do a test drive of at least 20 minutes. If regeneration does not start automatically by the engine electronic, start it with a garage probe.
1 liters | Art.-No. 33018
DPF Power Clean
This High Power Cleaner for Diesel Particle Filters is a special Diesel Additive Solution which is used as a regeneration help in Diesel Particle Filter Systems. Reduces ignition temperature of the soot collected in the particle filter which ensures permanent and complete filter cleaning while driving. The most economical way of particle filter cleaning and protection! The product can be used in all diesel engines and mixed with all diesel fuels.
- no assembling or disassembling, no standing time, no troubles no assembling, no disassembling, no standing times, no troubles
- reduces ignition temperature of the soot collected in the diesel particle filter
- no formation of secondary emissions
Fields of application: Suitable for all diesel engines with particle filter, can be mixed with all diesel fuels.
Application: Please pay attention to the dosage instructions! Add to the diesel fuel tank before filling up. 375 ml are sufficient for 60 to 80 liters of diesel fuel. Regular use every 3 months is recommended.
Attention, do not overdose!
Consumption per unit: 375 ml sufficient for 60 to 80 liters of diesel.
Application time: Works while driving
DPF Flushing Liquid
Diesel Particle Filter Flushing Liquid solves and removes all soot deposition and residues. The Flushing Liquid cleans gently and can be used on all aluminum, magnesium, zinc and cadmium parts. The product can be used perfectly for the latest generation of particle filters.
Shake before use!
1. Demount the particle filter and seal one opening of the filter with a tape
2. Fill the ready to use flushing liquid in the diesel particle filter
3. Let work for about 10 hours and shake from time to time. 4. After the cleaning process, rinse the filter thoroughly with clear warm water.
5. Re-mount the particle filter, add DPF Super Clean and do a test drive of at least 20 minutes. If regeneration does not start automatically by the engine electronic, start it with a garage probe.
approx. 10 h
Depending on the level of contamination
33449 DPF Flushing Liquid 1 litre
33440 DPF Flushing Liquid 5 litre
33444 DPF Flushing Liquid 10 litre
33741 DPF Flushing Liquid 25 litre